Services we provide
Slip Resistance - Product Testing
A positive first step in reducing your risk is determining the slip resistance of your pedestrian surfaces. Stone Initiatives has wide experience in slip resistance, both in product testing and litigation.
Wet Pendulum - Slip Resistance - AS4586:2013 & AS4663:2013
Dry Floor Friction testing - AS4586:13 & AS4663:2013
Skid Resistance - DTEI TP345
Accelerated Wear Testing - SI-AWT-2016
Accidents Never Happen!
In today’s world of litigation, it appears that accidents never happen, someone is always to blame – slips and falls are no exception. Pedestrian surfaces are becoming litigation minefields following falls on surfaces as wide ranging as polished stone to linoleum and bitumen roadways. There is a need for everyone from the architect to the maintenance supervisor to keep in mind the potential hazard of all pedestrian surfaces.
Understanding Slip Resistance
In Australia slip resistance is measured according to two different (but similar) standards depending on whether the surface is new or existing. New pedestrian surfaces are tested in accordance with the current version of AS 4586 while existing pedestrian surface are tested in accordance with AS 4663.
The standard for new pedestrian surfaces (AS 4586) provides a method for determining dry slip resistance (using a Floor Friction Tester) and a range of different methods for evaluating slip resistance in a wet condition (i.e. Pendulum, Wet/barefoot Ramp and Oil-wet Ramp). Only one of these methods (Pendulum) can be used on a fixed (installed) surface and this method is documented within AS 4663 along with the method for the Floor Friction Tester which is also able to be used on site.